Custom closet layout planning for IKEA PAX installation in Orlando FL

IKEA PAX Closet Installer in Orlando, FL

You shop IKEA. We assemble, wall-anchor, and hang the doors.

Get a Free Estimate

Name, phone and email — we reply within 24 hours. Or call (407) 483-2804.

Licensed & insured · (407) 483-2804

Orlando's IKEA PAX Closet & Wardrobe Installers

PAX is IKEA's wardrobe system — frames, interiors, and doors that look built-in when they are assembled square, leveled, and anchored. Inka Installation is an independent IKEA PAX installer in Orlando. We do not sell the boxes. You buy PAX at the IKEA Orlando store on Conroy Road or online. We assemble every frame, install KOMPLEMENT interiors, hang sliding or hinged doors, and fasten the run to the wall.

A PAX closet is not a bookshelf. Frames that sit off-level, doors that scrape, and units that are only "tipped" against the wall are the usual DIY outcome. We treat PAX like cabinetry: inventory first, square assembly, stud or block anchors, then door alignment last.

We are not affiliated with IKEA or TaskRabbit. You get a licensed, insured closet crew that installs PAX every week across Central Florida — not a one-off furniture assembler. Call (407) 483-2804 with your PAX planner printout or order list for a free estimate.

What We Install on an IKEA PAX Job

PAX Frames

Standard PAX frames come in 19 5/8", 39 3/8", and 59" widths, with 22 7/8" or 22 1/2" / 22 7/8" and 13 3/4" depths depending on the current IKEA lineup, and 79 1/4" or 93 1/8" heights. We assemble frames on-site, check for racking, and join multiple frames into a continuous run so the doors read as one closet, not a row of boxes.

KOMPLEMENT Interiors

Drawers, pull-out trays, shoe racks, wire baskets, jewelry inserts, pants hangers, and shelves only work if the frame is square and the drawer slides are parallel. We install the KOMPLEMENT layout you ordered — including mixed hang / fold / shoe configurations for master closets and secondary bedrooms.

Hinged and Sliding Doors

Hinged PAX doors need consistent reveal and soft-close that actually catches. Sliding-door PAX (AULI, HASVIK, and similar) needs a level upper track and frames that are plumb so the panels do not bind. We hang, adjust, and test the full travel before we leave.

Wall Anchoring in Florida Homes

Every PAX unit gets anchored. Orlando construction is a mix of wood studs, metal studs, and concrete block. We locate structure and use the right fastener — not a single drywall anchor from the box. That is the difference between a wardrobe that stays put in a Florida storm season and one that can tip.

Walk-In Closets with Multiple PAX Units

A walk-in with three to five frames needs filler, spacing at the return walls, and a plan for lighting. We fit the run to the room so you get a built-in look instead of leftover gaps. If you also want a custom millwork closet instead of PAX, see our custom closets and walk-in closet pages.

Lighting and Add-Ons

We install IKEA PAX lighting kits and can add a simple LED run when the closet is dark. Corner fillers, cover panels, and top boxes are cut and fitted on site.

PAX boxes arriving this week? Send the planner or a photo of the stack. We quote labor before we roll a truck.

CALL (407) 483-2804

Our PAX Installation Process

1. Quote from your planner

Share the IKEA PAX planner, a screenshot, or the article list. We price assembly, interiors, doors, and anchoring as one labor number. No "starts at" bait.

2. Inventory on arrival

We check frames, doors, and KOMPLEMENT against the order before a cam lock is turned. Missing or damaged parts get flagged so you can deal with IKEA while we install what is complete.

3. Frame assembly and leveling

Frames are assembled, joined, and shimmed. Closet floors in Orlando are rarely dead level. We compensate so doors hang true.

4. Wall anchoring

We find studs or block, drill, and fasten. Units are not left free-standing.

5. Interiors, doors, walkthrough

KOMPLEMENT goes in after the frames are locked. Doors and hardware last. We walk the closet with you, adjust anything that is off, and haul out the cardboard.

IKEA PAX Installation Pricing in Orlando

PAX Scope Typical Labor Time
Single PAX wardrobe (frame + interiors + doors) $300 – $500 2 – 4 hours
Two-unit reach-in $500 – $900 Half day
Walk-in (3–5 units) $800 – $2,000 1 day
Sliding-door run (extra track / alignment) Quoted with the frames Adds 1–3 hours
Lighting kit Quoted with the job Same visit

Price moves with door type, number of drawers, wall type, and whether we need filler or a return. Estimates are free. For kitchen SEKTION (not closets), use our IKEA kitchen assembly page. Full closet ranges are also on the cost guide.

Why PAX DIY Usually Goes Sideways

  • Out-of-square frames — drawers bind and sliding doors jump the track.
  • No real wall anchor — the included strap is not a substitute for hitting structure in block or metal-stud walls.
  • Sliding track not level — doors drift open or scrape the frame.
  • Wrong sequence — interiors installed before the run is plumb means you take it apart again.
  • Time — a three-unit walk-in is a long weekend for most homeowners. We finish it in a day.

PAX vs. a Custom Closet

PAX is the right call when you already bought IKEA, you want a wardrobe look on a budget, or the room is a rectangle that matches frame widths. A custom closet is better when the room is odd-shaped, you want a continuous 9-1/2" top shelf, or you need millwork that is not a grid of 39" boxes. We install both. Tell us what you bought (or what you want) and we will say which path fits.

IKEA PAX Service Area

We install PAX throughout greater Orlando and Central Florida, including all communities within about 60 miles of the IKEA Orlando store.

PAX Installation Near You

Orlando Kissimmee Winter Park Windermere Dr. Phillips Lake Nona Ocoee Winter Garden Sanford Altamonte Springs Clermont Daytona Beach Melbourne Celebration Davenport Apopka Longwood Casselberry Lake Mary Deltona

Related Services

Same crew. Different boxes.

IKEA PAX Installation FAQ

How much does IKEA PAX installation cost in Orlando?
A single PAX wardrobe is typically $300–$500. A walk-in with 3–5 units is usually $800–$2,000. Sliding doors and lighting are quoted with the frames. Call (407) 483-2804 for a number on your planner.
Do I need to assemble PAX before you arrive?
No. We unbox, inventory, assemble frames, install KOMPLEMENT, wall-anchor, and hang doors. Leave the boxes stacked.
Do you wall-anchor PAX wardrobes?
Yes. Every unit is anchored to wood studs, metal studs, or concrete block with the right fastener. We do not leave PAX free-standing.
Can you install PAX sliding doors?
Yes. Sliding-door PAX needs a level track and square frames. We also hang hinged doors (FARDAL, GRIMO, and similar) and set the reveals.
Are you affiliated with IKEA or TaskRabbit?
No. We are an independent installer. We specialize in PAX and SEKTION but are not an IKEA or TaskRabbit service.
What if IKEA is missing a PAX part?
We inventory before assembly. Missing or damaged parts get flagged immediately. We install what is complete and come back for the rest.

PAX Delivery on the Calendar?

(407) 483 - 2804 CALL FOR FREE ESTIMATE

Or send a message ↑

📞 Call WhatsApp Free Quote